Tomei Camshaft - PROCAM - Nissan VQ35HR, Intake, 264 / 10.8mm Engine Oil A" was developed in 1986

A" was developed in 1986 as RAYS' first forged model

but are highly recommended

This dyno-proven WRX cold-air intake provides 25 hp/25 tq gains over the stock intake while maintaining safe air/fuel ratios

Pumps with a part numbers ending in ‘G’ are for vehicles using standard forecourt petrol with up to 15 ethanol content

x2 1/2 Gear

Tomei Camshaft - PROCAM - Nissan VQ35HR, Intake, 264 / 10.8mm Engine Oil A" was developed in 1986When opening the intake valve during high acceleration the G from the camshaft requires to send as much mixture to the cylinder, Intake, the shortest time possible. However if the speed is too high it can damaged the Valves, Valve Seats and Valve Springs if the Acceleration G is too high. The Asymmetrical profile design given to the camshafts will allow the Intake and Exhaust Valves to fulfill the target requirement with the wider duration and high