059: PC - Series "V3" / Power-Switch (Shipment 15th of August 2026) 34mm x 38mm x 10mm

34mm x 38mm x 10mm / 16g with CFK enclosure

1x Enclosure

043: JST-GH-6p -> Pixhawk 3

The voltage reading of the LiPo is optimized for up to 14S LiPo packs

If the difference in current is bigger than +/- 10%

059: PC - Series "V3" / Power-Switch (Shipment 15th of August 2026) 34mm x 38mm x 10mmhis switch connects to any Power Cube "V3" or 030 031: 2x 200A PDB and acts like a manual power on off control. It isn't just a "switch". There is a small PCB included into the main wire which implements a current control mode, rather than a simple on off. The switch has already an installed 3D printed holder, which can be screwed down to the main frame. If this holder is not required, then please remove the Molex 6p housing and remove the holder.