Pay in 4 interest-free payments of $10.24 Learn more
Ships within 48 hours · Estimated delivery Aug 10 - Aug 15
35V / 3A -> +/- 0
1 (The Cube) and any other flight controller via an adapter cable
5mm / 17g (with 2x 10cm 10AWG)
1x PDB with soldered-on input wires (2x 20cm 8AWG)
It isn't just a "switch"
076: HS-200-HV (Shipment 15th of August 2026) 35V / 3A -> +/-200A Current measurement sensor board, based on Allegro Hall Sensor ACS 250U. The voltage reading of the LiPo is optimized for up to 14S LiPo packs. This Sensor board needs a power supply. So please select the matching BEC according to your preference from the BEC section. The BEC will also power the flight controller as well as the attached equipment like GPS, telemetry etc. Connected to the sensor are 2x10cm AWG10 wire (red) as a standard. The board
US$ 14.50
US$ 28.00
US$ 13.50
US$ 24.50
