Pay in 4 interest-free payments of $11.43 Learn more
Ships within 48 hours · Estimated delivery Aug 12 - Aug 17
Power-Cube 1-24 "V3" with 1 output 12V - 30V / 100W on resistive load
03V) for the sensor board PL-xxx as well as PL- Sensor Hub X2/X8 and output connector with Molex Clik-Mate 4p
The Power-Cube series can be customized
1x Power-Cube 1-24 / V3 with CFK enclosure and fan
1x (040) PL sensor cable / L = 150mm
078: HS-200-HV / 2x 15cm 8AWG (Shipment 15th of August 2026) Power-Cube 1-24 "V3" with 1200A Current measurement sensor board, based on Allegro Hall Sensor ACS 250U. The voltage reading of the LiPo is optimized for up to 14S LiPo packs. This Sensor board needs a power supply. So please select the matching BEC according to your preference from the BEC section. The BEC will also power the flight controller as well as the attached equipment like GPS, telemetry etc. Connected to the sensor are 2x15cm AWG8 wire (red) as a standard. The board
US$ 999.50
US$ 19.00
US$ 21.99
US$ 699.50
US$ 13.00
