Geekworm X1007 PCIe to Dual 2.5" SATA HDD/SSD Shield for Raspberry Pi 5 (NOT Support Boot from SSD) Raspberry Pi 4 Heatsink Case Power the Pi directly through

Power the Pi directly through the 40-pin header

4G wifi signal

1x G469 GPIO Terminal Block Breakout Board

5-inch HDD/SSD

Case Dimensions: 69*54

Geekworm X1007 PCIe to Dual 2.5" SATA HDD/SSD Shield for Raspberry Pi 5 (NOT Support Boot from SSD) Raspberry Pi 4 Heatsink Case Power the Pi directly throughNotes: The X1007 is designed for data storage purposes and does not support booting from HDD SSD with the existing firmware currently. Older SATA drives with less efficient flash media may not perform as well as newer drives New SATA HDDs SSDs are not partitioned and will need to be both partitioned and formatted when first connected to the Raspberry Pi before they will be accessed in the Explorer. The Raspberry Pi 5 board, SSD HDD, active cooler or